Mercedes-Benz 2007 R 320 CDI, Operator'S Manual

Page: 514 / 570

513
Practical hints
Battery
왘
Connect the positive lead to the posi-
tive terminal and fasten it’s cover
(
컄
page 512).
왘
Connect the negative lead to the nega-
tive terminal (
컄
page 512).
Charging the battery
If the battery is discharged, the battery can
be charged using the jump-start contacts
located in the engine compartment
(
컄
page 515).
왘
Charge the battery in accordance with
the instructions of the battery charger
manufacturer.
Batteries contain materials that can harm
the environment if disposed of improperly.
Large 12-volt storage batteries contain
lead. Recycling of batteries is the preferred
method of disposal. Many states require
sellers of batteries to accept old batteries
for recycling.
!
Never invert the terminal connections!
i
The following procedures must be carried
out following any interruption of battery power
(e.g. due to disconnection):
앫
Set the clock (
컄
page 181).
Vehicles with COMAND system with naviga-
tion module*: Time and date are set auto-
matically.
앫
Synchronize the door windows
(
컄
page 254).
앫
Synchronize the power tilt/sliding sunroof*
(
컄
page 260).
앫
Synchronize the power tilt/sliding panel*
(
컄
page 264).
앫
Synchronize the power folding exterior rear
view mirrors* (
컄
page 214).
Warning!
G
Never charge a battery while still installed in
the vehicle unless the accessory battery
charge unit approved by Mercedes-Benz is
being used. Gases may escape during charg-
ing and cause explosions that may result in
paint damage, corrosion or personal injury.
An accessory battery charge unit specially
adapted for Mercedes-Benz vehicles and
tested and approved by Mercedes-Benz is
available, permitting the charging of the
battery in its installed position. Contact an
authorized Mercedes-Benz Light Truck
Center for information and availability.
Charge battery in accordance with the
separate instructions for the accessory
battery charger.