Mercedes-Benz 2007 R 320 CDI, Operator'S Manual

Page: 368 / 570

367
Operation
Engine compartment
왘
Press button
k
or
j
on the mul-
tifunction steering wheel repeatedly
until the following message appears in
the multifunction display:
One of the following messages will
subsequently appear in the multifunc-
tion display:
앫
Engine oil level OK
앫
Add 1.0 qt. to reach max. oil
level
(Canada: 1.0 liter )
앫
Add 1.5 qts. to reach max. oil
level
(Canada:
1.5 liters
)
앫
Add 2.0 qts. to reach max. oil
level
(Canada:
2.0 liters
)
왘
If necessary, add engine oil.
For information on adding engine oil, see
(
컄
page 369).
For more information on engine oil, see the
“Technical data” section (
컄
page 538) and
(
컄
page 540).
Other display messages
If the SmartKey is not turned to position 2
in the starter switch, the following
message will appear:
Switch ignition on
to check engine oil level
왘
Switch on the ignition (
컄
page 39).
If you see the message:
Observe waiting period
왘
If the engine is at operating
temperature, wait 5 minutes before
repeating check procedure.
왘
If engine is not at operating tempera-
ture, wait 30 minutes before repeating
check procedure.
If you see the message:
Engine oil level
Not when engine on
왘
Turn off the engine.
왘
If the engine is at operating tempera-
ture, wait 5 minutes before checking
oil.
왘
If the engine is not at operating temper-
ature yet, you must wait 30 minutes
before checking oil.
i
If you want to interrupt the checking proce-
dure, press the
k
or
j
button on the
multifunction steering wheel.