Mercedes-Benz 2007 R 320 CDI, Operator'S Manual

Page: 261 / 570

260
Controls in detail
Power tilt/sliding sunroof*
Synchronizing
The tilt/sliding sunroof must be
synchronized
앫
after the battery has been
disconnected or discharged
앫
after the tilt/sliding sunroof has been
closed manually (
컄
page 481)
앫
after a malfunction
앫
if the tilt/sliding sunroof does not open
smoothly
왘
Remove the fuse for the tilt/sliding
sunroof from the fuse box
(
컄
page 520).
왘
Reinsert the fuse in the main box.
왘
Switch on the ignition (
컄
page 39).
왘
Press and hold the sunroof switch in
the direction of arrow
3
(
컄
page 259)
until the tilt/sliding sunroof is fully
raised at the rear.
왘
Hold the sunroof switch in direction of
arrow
3
for approximately 1 second.
왘
Open the tilt/sliding sunroof using the
Express-open feature (
컄
page 259).
If the tilt/sliding sunroof opens com-
pletely, it is synchronized.
If the tilt/sliding sunroof does not open
completely:
왘
Repeat the above steps.
Warning!
G
If the tilt/sliding sunroof encounters an
obstruction that blocks its path in a circum-
stance where you are closing the tilt/sliding
sunroof by moving the tilt/sliding sunroof
switch past the resistance point, or by
pressing and holding button
‹
on the
SmartKey, by pressing and holding the lock
button (vehicles with KEYLESS-GO*) on the
door handle, the automatic reversal function
will not operate.
The opening/closing procedure of the
tilt/sliding sunroof can be immediately
halted by releasing the switch or, if the
switch was moved past the resistance point
and released, by moving the switch in any
direction.
i
For information on which fuse box contains
the fuse for the power tilt/sliding sunroof, see
the fuse chart provided with the vehicle tool kit
(
컄
page 473).