Mercedes-Benz 2007 R 320 CDI, Operator'S Manual

Page: 326 / 570

325
Controls in detail
Useful features
Installing
You can install the rear center console in
two different positions. In the most for-
ward position (position 1) you can expand
the cargo compartment fully (
컄
page 302)
without removing the rear center console.
1
Latch (position 1)
2
Latch (position 0)
3
Rear center console base
4
Anchorage point (position 1)
5
Anchorage point (position 0)
3
Rear center console base
6
Rear center console
왘
Position center console
6
above
base
3
.
왘
Insert the tabs at rear of center
console
6
into anchorage points
4
or
5
on base
3
.
왘
Guide front of center console
6
down
towards base
3
.
Center console
6
must rest on
base
3
.
왘
Press down on front of center
console
6
until it audibly engages in
latch
1
or
2
.
Warning!
G
The rear center console must be properly in-
stalled on the center console base. Driving
with the rear center console not properly in-
stalled on the rear center console base may
cause the rear center console to come loose
and be thrown around in the vehicle interior,
causing injury to vehicle occupants during
앫
braking
앫
vehicle maneuvers
앫
an accident
i
The storage compartment and the cuphold-
ers in the rear center console are only illuminat-
ed, when the rear center console is installed in
the most rearward position (position 0).