MERak
MMk-736
GSM/M2M Gateway for Lifts
Rev. M1.0.3 - F1.0.3
©
Merak. All rights reserved
Installation Manual
15 of 16
6.1.1.
Example 1: Diversion of a single voice call number
We instruct the MMk-736 that, should the tele-alarm dial the number 933631428, the call
is to be made to 934108302:
PROGGSM s 0000 1:933631428 2:934108302
6.1.2.
Example 2: Diversion of several voice call numbers
We instruct the MMk-736 that, should the tele-alarm dial the number 933631428, the call
is to be made to 934108302, and if it dials 934199031, the call is to go to 933228151:
PROGGSM s 0000 1:933631428 2:934108302 3:934199031 4:933228151
6.1.3.
Example 3: Diversion of a number for voice calls and of another for CSD calls
We instruct the MMk-736 that, should the tele-alarm dial the number 933631428, a voice
call is to be made to 934108302, and if it dials 934199031, a CSD call is to be made to
902364612:
PROGGSM s 0000 1:933631428 2:934108302 9:934199031 10:902364612
6.1.4.
Example 4: Unconditional diversion of voice calls
We instruct the MMk-736 that, whatever number the tele-alarm dials, all calls are to be
made to 93631428: This is indicated with the symbol * in register number 1.
PROGGSM s 0000 1:* 2:93933631428
6.2.
Programming the activation of notifications
It is possible to configure the MMk-736 to send a notification by SMS when one of the following
events takes place:
A voice call has been made
An excessive number of calls has been made
An incident in the external power supply of the equipment has taken place
Insufficient battery charge has been detected
To tell the equipment to send these kinds of notifications, we must programme the number to
which they will be sent, and activate those notifications we wish to receive.
6.2.1.
Example 1: Notify when a voice call is made
We instruct the MMk-736 to send an SMS to the number 630888343 when a voice call is
made: