85-03-00955
P a g e
|
24
BACKUP DC POWER INLET PORT INSTALLATION
Under normal conditions when AC power is available, this appliance is designed to operate on 110 VAC power. During
power outages, it is designed to operate using 6 V DC backup power. This appliance is supplied with a DC power inlet
harness, a single gang outlet box and two single cover plates. In addition, a 4 X AA size battery pack and a connector
harness is also supplied.
Installation:
It is important that you install the supplied harness, outlet box and cover plate on the left side of this appli-
ance. The DC Power Inlet harness is 6 feet long, allowing installation of the single gang box up to 4 feet to the left of this
appliance. Install the single gang box at a maximum height of 18” to the center of the box or match the mounting height of
this single gang box with the height of other AC outlets that are installed in the same room as this appliance. WARNING:
DO NOT STAPLE the 6’ DC Power Inlet Harness to the wall studs.
Cover Plates
: Two cover plates are supplied and
are White and Beige in color. If the home décor re-
quires a different color other than the two supplied
colors, obtain one from a local hardware store.
Make certain that the cover you obtain is exactly the
same dimensions as the ones supplied with this
fireplace.
Decal Installation
: A notification decal (label) is
supplied with this fireplace that aids in identifying the
DC Power Inlet. Attach this label to cover plate once
installation is complete and verified.
Instruct Homeowner
: Demonstrate to the home-
owner how to attach the backup DC power pack
during power outages. Instruct homeowner to retain
the DC battery pack and the connecting harness in a
safe and secure place for use during power outages.
ATTACH DECAL
TO COVER PLATE.