Memmert INCO 108 Operating Manual Download Page 32

Page: 32 / 64

Operation and control

Weekdayy
Adjustment range:

Monday to Sunday

Day groups

y g

Adjustment range:

Working days Mo-Fr

Weekend Sat-Sun

No switch on time:

----

Appliance not switched on on this day

off

Switch on time (on)

( )

Adjustment range:

00:00 to 23:59 hours

off

Switch off time (off)

( )

One minute beyond the switch on time up to

24:00

off

selected as in the normal operating mode.

If no settings (temperature setpoint etc.) are made for the ON phase, the controller takes

over the values from the normal operating mode.

For reasons of safety, you should always check that only one switch one time is programmed

in the desired time blocks and days. By turning further to the right, parameters (temperature

setpoint etc.) can be selected as in the normal operating mode.
If the controller is in standby mode or the week time switch is in the ON phase, the tempera-

ture setpoint can be directly accessed by briefly pressing the SET key. By turning the control to

the right, you are returned to temperature monitoring, humidity and CO

setting. By turning

to the left, you come back to the settings for the individual time blocks.

Summary of Contents for INCO 108

































































Search results

Summary of Contents for INCO 108

Reviews:

Related manuals for INCO 108

Brands by name

Popular brands

Memmert INCO 108, Operating Manual

Search results

Summary of Contents for INCO 108

Reviews:

Related manuals for INCO 108

Brands by name

Popular brands