1-833-454-0864
5
c. Adjust the griddle top height by turning the leveling nut on the griddle feet, to ensure positive flow of grease to the
grease catch.
GAS HOOK-UP’S AND WARNINGS
(LP) Liquid Petroleum Gas
•
LP gas is non-toxic, odorless and colorless when produced. for your safety, LP gas has been given an odor (similar
to rotten cabbage) so that it can be smelled.
•
LP gas is highly flammable and may ignite unexpectedly when mixed with air.
LP Cylinder Requirements:
•
Use LP cylinder only with these required measurements:
12”(30.5cm) (diameter) x 18” (45.7 cm) (tall) with 20 lb. (9 kg) capacity maximum.
•
LP cylinders must be constructed and marked in accordance with specifications for LP cylinders of the U.S.
Department of Transportation (DOT) or the National Standard of Canada, CAN /CSA-B339, Cylinders spheres and
tubes for transportation of dangerous goods. See LP cylinder collar for marking.
LP Cylinder Valve Must Have:
•
Shut-off valve with a correct cylinder valve output as specified in current
standards. ANS Z21.58-2018 / CSA 1.6-2018 Outdoor Cooking Gas
Appliances.
•
Type 1 outlet compatible with regulator or grill. The type 1 valve is easily
recognized by the large external thread on the outside of the valve.
•
Safety relief valve with direct connection to the vapor space of the cylinder.
•
UL listed Overfill Protection Device (OPD). This OPD safety feature is
identified by a unique triangular hand wheel.
Use only LP cylinders equipped with this type of valve.
•
A device for vapor withdrawal.
•
A collar to protect the LP tank shut off valve.
•
A ring on the bottom of the LP tank to secure it to the support assembly.
•
Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the
cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of
propane.
Safety Relief Valve
Strap and Cap
Type 1 outlet with
thread on outside
OPD Hand Wheel
Leveling Your Griddle
Summary of Contents for G70201
