InfiniBand FDR Switch Platform Hardware User Manual
Mellanox Technologies
25
5. The shelf comes with the four brackets pre-installed. Two of the brackets should be
loose. They may need to be removed and repositioned to meet the distance between
the vertical supports of the rack.
Figure 7: Adjustable Shelf Brackets
Figure 8: Top of Shelf Bracket
6. Move the shelf brackets on the shelf. Place the shelf bracket so that it measures
slightly more than the measured distance between the vertical rack supports. Make
These two brackets will need
to be adjusted. They may even
need to be removed and repo-
sitioned.
The holes in the bracket are
offset to one side.
The holes must be closer to the
top of the shelf.
The holes in the bracket are
offset to one side.
The holes must be closer to the
top of the shelf.
Top of shelf
Bottom of shelf is even with this side of the bracket,
the greater distance between the holes and the edge of
the bracket show that this is the bottom side.
