InfiniBand Switch Platform Hardware User Manual
Mellanox Technologies
8
Revision History
About this Manual
This manual provides installation and set-up instructions for the IS5200 GT series QSFP
Chassis InfiniBand Switch Platform.
Intended Audience
This manual is intended for users and system administrators responsible for installing
and setting up the chassis platform.
The manual assumes familiarity with the InfiniBand
®
architecture specification.
Table 1 - Revision History of this User’s Manual
Revision
Date
Details
1.6
Feb. 2014
Rearranged document: Consolidated installation sections under
Chapter 1, “Installation,” on page 10
; updated
Chapter 1, “Overview,”
on page 12
; and re-ordered sections).
Added:
•
Figure 49, “Management Module LEDs,” on page 57
Updated:
•
Section 1.4, “Power Supply Redundancy,” on page 15
•
Section 1.6.1.5, “Installing the Shelf,” on page 21
•
Section 1.6.2, “Installing the Cable Holder,” on page 25
•
Section 1.9, “Hot Swap Insertion and Extraction,” on page 35
•
Section 7.1, “Disassembling the Chassis,” on page 78
•
Appendix A, “Installation Safety Warnings,” on page 80
1.5
Sept. 2012
•
Added figure11.
•
Added information regarding inserting the bottom spine first. Insert spines
from bottom to top.
•
Fixed broken links
•
Added step to remove plastic covering.
•
Added IBM Lift tool
1.4
Aug. 2011
Fixed Installation kit parts
1.3
Oct. 2010
Added air flow direction
1.2
Oct. 2010
•
Removed the Chassis Rail from the installation kit and from the installation
instructions.
1.1
Aug. 2010
•
Added weight lifting warning
•
Added step to Installation procedure
“Remove all protective plastic film from all sides and top of the chassis.”
•
Added cable power classes
1.0.1
July 2010
•
Added last page with barcode
•
Changed Installation procedure to include Remove all FRUs
•
Need 4 people to lift
1.0
July 2010
First release
