Basic Operation
Rev 1.0
Mellanox Technologies
16
2
Basic Operation
2.1
Gateway Platform Hardware Overview
Figure 3 shows the power side panel view of the gateway. The figure shows the hot-swap power
supply locations and the hot-swap fan module, and an I2C banana connector.
The figure below shows the connector side panel views of the gateway. The figure shows port
configurations for the systems.
• 2 – Ethernet RJ-45 connectors for management
• 1 – RJ-45 connector for connecting to a host PC
• 1 – USB connector.
All gateways have various status LEDs for on site status information.
Figure 3: Gateway System Power and Connector Side Panels
All connectivity except for power cords is via the connector side panel. All connectors can sup-
port active optical cables.
2.2
Status LEDs
The System Status LEDs are located to the left of the connectors on the connector side panel, and
on the power side at the far right.
OK
!
!
OK
OK
!
!
OK
12C
Power Side Panel
G
