SwitchX 36-Port QSFP InfiniBand- Ethernet Gateway System Hardware User Manual
Rev 1.0
Mellanox Technologies
31
4. Stacking the Chassis
5. Double Pole/Neutral Fusing
6. Multiple Power Inlets
7. During Lightning - Electrical Hazard
8. Copper Cable Connecting/Disconnecting
9. Rack Mounting and Servicing
10. Equipment Installation
The chassis should not be stacked on any other equipment. If the chassis falls, it can
cause bodily injury and equipment damage.
This system has double pole/neutral fusing. Remove all power cords before opening
the cover of this product or touching any internal parts.
Risk of electric shock and energy hazard.
The PSUs are all independent.
Disconnect all power supplies to ensure a powered down state inside of the
gateway
platform.
During periods of lightning activity, do not work on the equipment or connect or dis-
connect cables.
Copper cables are heavy and not flexible, as such they should be carefully attached to
or detached from the connectors. Refer to the cable manufacturer for special warn-
ings/instructions.
When this product is mounted or serviced in a rack, special precautions must be taken
to ensure that the system remains stable. In general you should fill the rack with
equipment starting from the bottom to the top.
This equipment should be installed, replaced, and/or serviced only by trained and
qualified personnel.
