Meler MACRO 200, Instruction Manual

Page: 87 / 92

A-5
PROFIBUS CONNECTION MA-5068-E MACRO 200 INSTRUCTIONS MANUAL
Memory table description
Byte: Configuration – Read
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Level Hot-Melt
State
Front Panel
Temp. Ok signal
Activated
Temp. OK signal
waiting
bit 7 : Define the state of the hot-melt low level detection
“ 0 “ : Hot-melt level OK
“ 1 “ : Hot-melt level low
bit 6 : Define the state of the front panel
“ 0 “ : Front panel activated
“ 1 “ : Front panel deactivated
bit 2,3,4,5 : No function
bit 1 : Define the state of the temperature OK signal
“ 0 “ : Temperature OK
“ 1 “ : Temperature NO OK
bit 0 : Define the state of the delay timer in the temperature OK signal
“ 0 “ : It`s not temporizing
“ 1 “ : It`s temporizing
Byte: Configuration- Read/Write
bit 7 : No function
bit 6 : Define the state of the hot-melt low level alarm
“ 0 “ : Low level detection OFF
“ 1 “ : Low level detection ON
bit 5 : Define the state of the Activate/Deactivate Programming
“ 0 “ : Activ/Deactiv Programming OFF (not allowed )
“ 1 “ : Activ/Deactiv Programming ON (allowed)
bit 4 : Define the state of the Standby Programming
“ 0 “ : Standby Programming OFF (not allowed )
“ 1 “ : Standby Programming ON (allowed)
bit 7 bit 6 bit 5 bit 4 bit 3 bit 2 bit 1 bit 0
Alarm hot-melt-
low level
Programming
ON/OFF
Programming
Standby
Motor ON
Temperature
units
Standby ON/OFF