MELAG MELAtronic 23EN, User Manual, Page: 25 / 55

MELA tronic 23EN
25
5 Logging
In order to document the progress of the sterilization program, then the processor memory stores logs of the
last 40 cycles. These logs can be downloaded at a later stage via the serial interface (RS232).
When the memory is full (40 program runs) then before the start of the next run the oldest log will automatically
be overwritten. If a log printer or another output medium is connected (and operable) and the option "Immed.
output? NO" has been selected, then confirmation will be requested before the oldest log is overwritten (see
Section 9.1).
The following possibilities can be used for output of the logs:
▪ Computer, e.g. with MELAtrace/MELAview *
▪ Log printer MELAprint 42/44
▪ MELAflash CF-Card-Printer
▪ MELAnet Box
The installation and the operation of these devices is provided in Section 5.2 and the following.
*
From device version 5.11 is the software version MELAview 3 required.
5.1 Set date and time __________________________________________________
Correct batch documentation requires the correct date and time setting on the steam sterilizer. The date and
time can be reset if necessary (e.g. winter time / summer time) as follows:
Operation Display message
1. Hold down "+" button and also press "-" button.
Select "Function" menu, submenu "Last batch number"
2. Press "+" (or "-"), until the display shows the submenu
"Date/Time".
3. Press "Program", the display shows the current hour (24-
hour clock) (here for example 17.00)
Func ti on:
La s t ba tc h num ber
Func ti on:
Da t e / Tim e
Da t e / Tim e
Hour : 1 7