MELAG MELAtronic 23EN, User Manual, Page: 10 / 55

MELA tronic 23EN
10
Feed water supply
The feed water supply for steam generation is conducted
automatically via an internal storage tank.
Optimal total operating time
The steam sterilizer uses electronic parameter control. This
enables the steam sterilizer to optimize the total operating time of a
program in dependence on the load.
High safety via
comprehensive safety
features
The steam sterilizer constantly checks pressure and temperature in
the chamber. The door locking system prevents the door from
being opened when excess pressure has been built up.
The steam sterilizer electronics has an integrated process
evaluation system. It compares the process parameters (such as
temperature, time and pressure) during a program run. It monitors
the parameters in terms of their threshold values during control and
regulation and guarantees safe and successful sterilization.
If one or more parameters depart from the threshold values
determined, the steam sterilizer issues warning or error messages
and if necessary, aborts the program. In the case of a program
abort, follow the instructions on the display.
Additional function controls
The test program enables you to perform additional function
controls at any time.
You can monitor the quality of the feed water using the conductivity
measurement.
Effective batch
documentation
The steam sterilizer is equipped with a log memory which can save
up to 40 program cycles. This saves all the data regarding the
program run automatically.
You can read out the internal log memory immediately after the
program end or at a later point.