MELAG MELAtronic 23EN, User Manual, Page: 27 / 55

MELA tronic 23EN
27
The log printer is ready for operation when the voltage lamp "P" shines and the status display (On line / Off
line) "SEL". The operating manual of the log printer includes further details, including the assembly of an
external paper feed, inserting paper, and the general operation of the log printer.
5.2.2 Initialising the log printer __________________________________________________________
After connecting the log printer to the steam sterilizer it must be registered with the steam sterilizer processing
unit (initialised). Proceed as follows:
Operation Display message
1. Switch on steam sterilizer Display shows:
1. Line: Time
2. Line: Pressure of chamber
Temperature inside chamber
2. Hold down "+" button and also press "-" button.
The "Function" menu with the submenu "Last batch number" is
shown
3. Navigate with the button "+" up to the display where the submenu
"Batch counter" is shown.
4. Press "Program", the menu "Batch output", submenu "Output
medium" is shown
5. Press "program" again, display shows submenu "No output
medium"
6. Press "+" (or "-") button until display shows
"MELAprint"
7. Press "Program" button,
Confirm the setting, return to menu "Batch output"
8. Press "Start-Stop" button,
return to the "Function" menu
1 4 :2 7 :12
0 .0 2 bar 2 5° C
Func ti on:
La s t ba tc h num ber
Func ti on.
Ba t c h out put
Ba t c h out put
O ut put me di um
O ut put me di um
No out put m edi um
Ba t c h out put
O ut put me di um
Func ti on:
Ba t c h out put
O ut put me di um
M EL Apr i nt