Meistergram PRO 150 Series, Quick Reference Manual

Page: 42 / 44

42
The machine is equipped with automatic thread break
indication. If either the top or the bobbin thread breaks
during sewing, the machine will stop and the Thread Break
Indicator light will flash red. The controller will also beep
and display the Thread Break icon for the Stop Status.
The design may be backed up further by pressing and holding the Stop
button. If the Stop button is held for more than 5
seconds, the button can be released and the machine
will continue to back up. Press the button again to
stop the machine from backing up further.
Once repairs have been made, the machine may
be re-started by pressing the Start button.
The machine will only sew on the head that detected the thread break
until it reaches the stitch where the thread break was detected. Then
the other sewing head(s) will automatically join in sewing.
Thread Break Icon
Thread
Break
Indicator
Thread Break Detection