6
Initial Power Up
Upon initial power up of the machine, it is recommended that the Zero Point of
the machine is reset. The Zero Point is an electronic reference point for the
machine to base the frame movement calculations. It also allows the machine to
recover accurately from a power failure, even if the frame is moved while the
power is off.
To set the Zero Point on the machine, first be sure any hoops are
off of the machine and the table is clear.
Then press the key. The Assistant Menu will appear.
Press 5 to select SET POWER RESUME/ ZERO POINT and
press Enter. A prompt will appear on the bottom of the screen.
MANUALLY, SET “ZERO” POINT
Y
Press the down Arrow Key to change the value to “N”.
Another prompt will appear.
ENTER: SET POWER RESUME AND FRAME
Press Enter to continue. The frame will move to the back right
corner of the machine and then return to its original spot.
Press the key to exit the Assistant Menu.
Summary of Contents for PRO 150 Series
