Meistergram PRO 150 Series, Quick Reference Manual

Page: 23 / 44

23
Return to Start
The Return to Start menu provides the ability to save the starting frame position
(Origin) of any design and to return to the start of a design during sewing.
When the Return to Start button is pressed, the following menu
appears on the screen:
Using either the Arrow Keys or the Numeric Keypad, select the desired option and
press the Enter Key.
BACK TO ORIGIN - Sends the machine back to the start of the design when in
Sewing Mode.
RESTORE ORIGIN - Moves the frame to the saved starting point (Origin) of
the current selected design.
SAVE ORIGIN - Saves the current position of the frame for the selected design
as the Start Point (Origin). The position is retained in memory for that particular
design for later use.
AUTO SET ORIGIN - Sets the Start Point as the center of the machine Frame
Range. (Not Recommended)
FRAME TO BORDER - Traces a square around the outside perimeter of the
design to insure the design will fit inside the hoop.
NDL DOWN&ORIGIN - Puts the needle down at the Start Point (Origin). Used
for Yard Good Embroidery.
BACK TO ORIGIN
RESTORE ORIGIN
SAVE ORIGIN
AUTO SET ORIGIN
FRAME TO BORDER
NDL DOWN&ORIGIN
1
2
3
4
5
6
1
2
3
4
5
6