Meistergram PRO 150 Series, Quick Reference Manual

Page: 19 / 44

19
Idle Mode
Idle mode, or Float, is the ability to move through the design without stitching.
The Idle Mode button has three settings: Normal Embroidery, Low-Speed Float
and High-Speed Float.
The display shows which mode is selected in the top right hand corner of the
machine display. Idle mode is only active while in Sewing Mode mode.
To Exit Sewing Mode, press the key then press the Enter key.
The Sewing Mode Status will change to
To change the Float or Idle mode, press the button on the
controller.
Each time the
key is pressed, the Float Status Indicator will
change to reflect the Float Mode
Is Normal embroidery mode. When this mode is selected the
machine will sew normally when the Start button is pressed.
Is Low-Speed Float. When this mode is selected and the Start
button is pressed, the frame will move through the design stitch by
stitch but the sewing head will not engage. To stop the machine, press
the Stop button.
Is High-Speed Float. When this mode is selected and the Start
button is pressed, the display will begin drawing the design and the
stitch count will increase. When the Stop button is pressed, the display
and stitch count will stop at that stitch and the frame will move to the
position that is indicated on the screen.