Meistergram PRO 150 Series, Quick Reference Manual

Page: 29 / 44

29
Once the design is selected, the Design Parameters menu is
displayed.
If no changes are needed, press the Enter Key.
To change any of the settings, use the Arrow Keys to select the
setting to change and press Enter.
Press the
key to clear the existing value. Input the new value
using the Numeric Keypad.
(For more information on the Design Parameters Settings, see the Design Parameter
Settings Table )
Once all the settings are correct, press the key to exit the
Design Parameters menu.
To begin sewing, press the
key and then Enter. Then follow
the prompt on the screen. For more information on Sewing Mode,
see the section entitled Sewing Mode.
C