RedHandScope60MHz
HandheldDSO&DMM
9-Appendix
59
9. Appendix
9.1 Appendix a Specifications
9.1.1 Oscilloscope
Only if another instruction is provided, are all technical specifications applicable to the probe with
the 10X attenuation switch setting and the RedHand Scope series digital type oscilloscope. In
order to be up to these specifications, the oscilloscope should meet the following requirement.
■
The instrument should operate continuously for more than 30 minutes under the specified
operating temperature.
■
If the operating temperature range of variation is up to or larger than 5 Celsius degrees, the
system function menu must be opened to make the system perform a
“
self- calibration
”
procedure.
Except those specifications marked with the word
Typical
, all specifications can be up to.
Sampling
Sampling modes
Normal sampling
Peak detection
Average value
Sampling rate
250 MSa/s
Input
Input coupling
DC, AC
Input impedance
1M
Ù
±
2% connected in parallel with 20pF
±
5pF
Probe attenuation coefficient
1X, 10X, 100X, 1000X
Max. Input voltage
400V (peak)
Horizontal
Sampling rate range
10S/s
～
250MS/s
Waveform interpolation
（
sin x
）
/x
Record length
6K points on each channel
