RedHand Scope60MHz
Handheld DSO & DMM
7-Advanced Function of Oscilloscope
43
figure 38: Edge Trigger
7.5 Triggering Control
There are two triggering modes including Edge triggering and Video triggering. Each trigger
mode is set by different function menu.
Edge triggering:
It occurs when the trigger input passes through a given level along the specified
direction.
Video triggering:
Perform video field trigger or line trigger on the standard video signals.
The following describes the Edge triggering and Video triggering menus respectively.
7.5.1 Edge Triggering
The Edge triggering is a mode by which trigger occurs at the triggering threshold value of the
input signal edge. With the
Edge triggering
selected, the trigger happens on the rise or fall edge
of the input signal, shown as the following figure.
The
Edge triggering
menu is described in the following table.
Function menu Settings
Description
Slope
Rise
Fall
Triggering on the rise edge of the signal.
Triggering on the fall edge of the signal.
Signal source
CH1
CH2
CH1 is used as the trigger source.
CH2 is used as the trigger source.
Trigger mode
Auto
Normal
Acquisition of waveforms is possible even if there is no
triggering condition detected.
Acquisition of waveforms can only be done when the