RedHandScope60MHz
Handheld DSO & DMM
6-Using the Multimeter
27
Refer to figure 22
figure 22: Diode Measurement
6.4.3 On-off Test
To perform an On-off test, do the following:
1.
Press the
R
key and
R
appears on the top of the screen.
2.
Press the
AUTO SET
key till the following is shown on the screen.
3.
Insert the black lead into the
COM
banana jack input and the red lead into the
V/
Ù
banana
jack input.
4.
Connect the red and black leads to the test point. If the resistance value of the tested point is
less than 50
Ù
, you will hear beep sound from the test tool.
Refer to figure 23