RedHandScope60MHz
Handheld DSO & DMM
6-Using the Multimeter
28
figure 23: On-off Test
6.4.4 Making a Capacitance Measurement
To measure a capacitance, do the following:
1.
Press the
R
key and
R
appears on the top of the screen
2.
Press the
AUTO SET
key till
C
appears at the top of the screen.
3.
Insert the measured capacitance into the quadratic jack and the screen shows the
capacitance reading.
Notice:
when measured value is less than 5 nF capacitance, please use small
capacitance measurer of this multimeter and use relative value measuring
mode to improve measuring precision. It will take about 30seconds if
capacitance measurement is large than 40uF.
Refer to figure 24
