Meiko BTA160, Operating Instructions Manual

Page: 2 / 48

Operating Instructions Tray washing machine Modell BTA 160 / 240
Datei:BA_BTA_9668415_EN_2009-10.docx
9668415 2/48
W e reserv e the right to c hange ex ec ution and constr uction!
MEIKO Maschinenbau GmbH & Co. KG, Englerstraße 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Contents
Page
1 Introduction and general information 4
1.1 Storage 5
1.2 Name and address of manufacturer 5
1.3 Description of the type of equipment 5
2 Explanation of the safety symbols used 5
3 Use of the appliance for the purpose intended 6
4 CE-Declaration of Conformity 6
4.1 CE-Declaration of Conformity 7
4.2 Declaration of Incorporation 8
5 General safety instructions 10
5.1 Operator's duty of care 10
5.2 Basic safety measures 11
6 Assembly instructions (for a partially completed machine) 13
7 Delivery, shipping, installation and assembly 14
7.1 Delivery 14
7.2 Transport and installation 14
7.3 Installation and assembly 18
7.4 Floor load from the dish-washing machine 18
7.5 Instructions for the disposal of the packaging material 18
7.6 Connection to the electricity supply. 19
7.7 Temperature sensors / Temperature limit switches 20
7.8 Fresh water connection 21
7.9 Waste water connection 22
7.10 Hot steam, hot water from the pumps 23
7.11 Exhaust air connection of the appliance 24
7.12 Installation and connection of dosing units 24
8 Machine settings for initial commissioning by the service engineer 25
8.1 Commissioning 25
8.2 Chemical product settings 25
8.3 Works to be carried out before initial commissioning 26
8.4 Setting the temperature of the wash tank, clean water rinsing, drying 26
8.5 Program selection/ Conveyor speed 28
9 Preparation – Operation 28
10 Operation 29
10.1 Washing interruption 30
11 Shutting the appliance down 31
12 Short operating instructions 32
13 Cleaning 33
13.1 Safety instructions for cleaning 33
13.2 Cleaning after operation 33
13.3 Cleaning instructions – daily 34
13.4 Care of stainless steel surfaces 35
13.5 Cleaning after operation 35
14 Tips for self-help in the case of faults 37
15 Staff training 38
16 Disposal of the installation 38
17 Noise level 38
18 Non-ionizing radiation 38
19 Maintenance 39
19.1 Basic safety measures during normal operation 39