MeiG
Product
Manual
of
SLM750
Module
SLM750
Module
Hardware
Design
Page 83, total 84 pages
10 Appendix B GPRS Coding Scheme
Table 39: Description of coding schemes
Mode
CS-1
CS-2
CS-3
CS-4
Coding
speed
1/2 2/3 3/4 1
USF
3 3 3 3
Pre-coded
USF
3 6 6 12
Radio Block excl.USF and BCS
181
268
312
428
BCS
40 16 16 16
Tail
4 4 4 -
Coded
Bits
456 588 676 456
Punctured Bits
0
132
220
-
Data rate Kb/s
9.05
13.4
15.6
21.4
FCC Statement
FCC Label: The FCC ID is on the front of the device. It is easily visible.
The device FCC ID is 2APJ4-SLM750V.
A label with the following statements must be attached to the host end product:
This device contains FCC ID: 2APJ4-SLM750V.
The manual provides guidance to the host manufacturer will be included in the documentation that
will be provided to the OEM.
The module is limited to installation in mobile or fixed applications.
The separate approval is required for all other operating configurations, including portable
configurations and different antenna configurations.
The OEM integrators are responsible for ensuring that the end-user has no manual or instructions to
remove or install module.
Module grantee (the party responsible for the module grant) shall provide guidance to the host
manufacturer for ensuring compliance with the Part 15 Subpart B requirements.
The host manufacturer is responsible for additional testing to verify compliance as a composite
system. When testing the host device for compliance with the Part 15 Subpart B requirements, the
host manufacturer is required to show compliance with the Part 15 Subpart B while the transmitter
module(s) are installed and operating. The modules should be transmitting and the evaluation
should confirm that the module’s intentional emissions are compliant (i.e. fundamental and out of
