This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated withmini mum distance 20cm between
the radiator & your body The host product Labeling Requirements:
NOTICE: The host product must make sure that FCC labeling requirements are met. This includes
clearly visible exterior label on the outside of the final product housing that displays the contents shown
in below:
Contains FCC ID:2APJ4-SLM320-L
1.8Information on test modes and additional testing requirements:
When setting up the configuration, if the pairing and call box options for testing do not work, the tester
needs to coordinate with the module manufacturer to access the test mode software.
1.9Additional testing, Part 15 Subpart B disclaimer:
The modular transmitter is only FCC authorized for the specific rule parts (FCC Part 2,22,24,27 ) list
on the grant, and that the host product manufacturer is responsible for compliance to any other FCC
rules that apply to the host not covered by the modular transmitter grant of certification.
1.10Information on test modes and additional testing requirements:
When testing, testers need to refer to the user manual, and the sample power supply needs to use a
special adapter power supply.
