MEIG SLM 320 Design Manual Download

Page: 76 / 92

MeiG_SLM320_Hardware Design Manual

MeiG Smart Technology Co., Ltd

75/89

and the data network was successfully
registered;

Set the module to sleep state through

AT instruction (USB is in suspended
state);

Under the condition of no data

transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

Data
transmission

TDD

1) Room
temperature;
2) Dc power
supply is used
to supply the
module, and
the voltage is
set at 3.8V;

Band38 CH37800
1)

The tested module was powered on,

and the data network was successfully
registered;

Set the module to sleep state through

AT instruction (USB is in suspended
state);

Under the condition of no data

transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

1.2

Band38 CH38000
1)

The tested module was powered on,

and the data network was successfully
registered;

Set the module to sleep state through

AT instruction (USB is in suspended
state);

Under the condition of no data

transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

1.3

Band38 CH38200
1)

The tested module was powered on,

and the data network was successfully
registered;

Set the module to sleep state through

AT instruction (USB is in suspended
state);

Under the condition of no data

transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

1.3

Band39 CH38300
1)

The tested module was powered on,

and the data network was successfully
registered;

Set the module to sleep state through

AT instruction (USB is in suspended

1.2

Summary of Contents for SLM 320





























































































Search results

Summary of Contents for SLM 320

Reviews:

Related manuals for SLM 320

Brands by name

Popular brands

MEIG SLM 320, Design Manual

Search results

Summary of Contents for SLM 320

Reviews:

Related manuals for SLM 320

Brands by name

Popular brands