MEIG SLM 320 Design Manual Download

Page: 58 / 92

MeiG_SLM320_Hardware Design Manual

MeiG Smart Technology Co., Ltd

57/89

Band4 CH20375

Under the condition of no data
transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

38.59

Band5 CH20525

Under the condition of no data
transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

37.46

Band5 CH20600

Under the condition of no data
transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

38.83

Band5 CH20450

Under the condition of no data
transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

37.32

Band5 CH20525

Under the condition of no data
transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

37.46

Band8 CH21750

Under the condition of no data
transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

39.3

Band8 CH21625

Under the condition of no data
transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

37.59

Band8 CH21500

Under the condition of no data
transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

37.88

TDD

The module is
powered on,
and the DRX
monitoring
period of the
idle state on
the network is
1.28s

Band40 CH39150

Under the condition of no data
transmission, the tested module
maintained for 10 minutes and recorded
the average current for 10 minutes.

38.58

Band40 CH39150

Under the condition of no data
transmission, the tested module

38.94

Summary of Contents for SLM 320





























































































Search results

Summary of Contents for SLM 320

Reviews:

Related manuals for SLM 320

Brands by name

Popular brands

MEIG SLM 320, Design Manual

Search results

Summary of Contents for SLM 320

Reviews:

Related manuals for SLM 320

Brands by name

Popular brands