Configuration
48
Schritt Aktion
Result:
The beginning of the pairing process is acknowledged at the supply
module with a signal tone. All three LEDs should light up on the remote control.
After the pairing has been successfully completed, the line
Status
displays the
message
SFC250-RC active
and the serial number of the paired remote
control. The remote control can now be used (see page 34).
The pairing also remains active after a change of location of the supply module
and is only canceled when another remote control is connected to the supply
module.
6
Turn on the remote control by briefly pressing the
button, if you do not want
to use it directly after pairing.
One and the same remote control can in principle be paired with several supply
modules. However, it is imperative to ensure that the distance of the supply
modules from each other is large enough (> 500 m), so as not to accidentally
cause switching operations on the wrong power module!
Immediately after pairing, the remote control is activated on the software side and
remains so until it is manually deactivated in the software. A permanently activated
remote control has the advantage that it can be switched on and used directly if
required. However, in order to avoid parallel and conflicting operator actions, operation
and configuration via remote access is deactivated when the remote control is activated.
If you do not want to give up the option of remote configuration, you can also disable the
remote control by default. When needed, however, you will need to reactivate it before
using it.
To enable/disable the remote control, proceed as follows:
Step Action
1
Call up the page
SFC250-RC
locally on the device or via remote
accessing (only possible if remote control is deactivated).
Result: The dialogue for managing the remote control opens.
The
Status
line shows whether the remote control is active or inactive.
2
Call up the menu item
SFC250-RC ON/OFF
.
Result:
The coupled remote control is either activated or deactivated,
depending on its current status.
Activating/deactivating
the remote control
