Megger PQ2000, User Manual

Page: 40 / 94

M
MPQ2000-UG-EN Rev 8 October 2018
34
Uploading a Setup File from the SD Card
1. Verify the batteries in the unit are fully charged or plug the unit into an AC
source.
2. Power up the MPQ2000 PQ Analyzer and go to the MAIN Menu.
3. Plug the SD card into the MPQ2000 SD Card slot.
4. Scroll down to SD Card on the Main Menu and press the ENTER

key. This
will open the SD Card Memory Screen.
5. Scroll down to IMPORT on the SD Card screen and press the ENTER

key.
This will display the setup files on the SD Card.
6. Scroll down to the desired setup file and press the ENTER

key. This will
import the setup file to the unit.
7. Press the ENTER

key to close the IMPORT SUCCESS message.