Megger PQ2000, User Manual

Page: 37 / 94

MPQ2000 Operation
MPQ2000-UG-EN Rev 8 October 2018
31
3. Use the

UP /

DOWN & ENTER

keys to scroll down and select the
desired selections.
From this screen the user can select the following:
1. Change the Voltage and Current Trace colors. (These can be matched to local
standards)
2. Click in the SCOPE field to open the drop down menu. This will allow you to
select the screen to which the SCOPE shortcut key will default.
3. Click in the DMM field to open the drop down menu. This will allow you to
select the screen to which the DMM shortcut key will default.
4. Click in the LINE WEIGHT field to open the drop down menu. From here you
can change the line weight of the traces on the charts..
5. Click in the GRID LINE field to enable or disable grid lines on the charts
displayed on the unit.
6. Change the Auto shutdown time (in minutes). The analyzer will shutdown after
this amount of time providing the analyzer is NOT powered from its AC adapter
and the analyzer is NOT recording.