Megger PQ2000, User Manual

Page: 38 / 94

M
MPQ2000-UG-EN Rev 8 October 2018
32
Importing / Activating a Setup File
A setup file is used to program the unit to perform different types of recording.
Multiple setup files can be installed into the unit. These setup files can be activated
from the front panel of the unit or using the Megger PQ software.
Uploading a setup file from the PC
See the MEGGERPQ Manual.
Uploading a setup file from the USB stick
1. Verify the batteries in the unit are fully charged or plug the unit into an AC
source.
2. Power up the MPQ2000 PQ Analyzer and go to the MAIN Menu.
3. Plug the USB stick into the MPQ2000 type A USB Port.
4. Scroll down to USB on the Main Menu and press the ENTER

key. This will
open the USB Memory Screen.