2. Installation
05
ENGLISH
2.1 Setting the Antenna to Installation Mode
General information
Provide a suitable workplace, a garage/hall is better than an outdoor place. The
ambient temperature for installation must be b5° C and max. +25° C.
Do not work directly in the sun. Observe the work regulations when handling
chemical products. Ensure the necessary work hygiene.
As a matter of principle, we recommend having the installation carried
out by your specialist dealer or a specialist workshop! Please also note
that the vehicle height changes accordingly due to the antenna! Please
strictly adhere to the individual points of the installation instructions!
1.
Connect the supplied antenna cable (10 m) to the antenna and the control unit.
2.
Connect the supplied power cable to a power source (12 V, min. 5 A) and
the control unit.
3. Switch the control unit on at the standby button.
4. The antenna now points upwards.
Once the antenna is upright, dis-
connect the power supply from the
control unit.
5. Loosen the four Allen screws to lift the
antenna unit from the mounting plate.
6. Now remove all connection cables to
start the installation.
To remove the mounting plate from the antenna, we recommend to set the
antenna into installation mode to be able to loosen the four Allen screws more
easily. To do this, you must first connect the antenna and the control unit pro
-
visionally.
Summary of Contents for Traveller-Man 3
