![background image](http://html.mh-extra.com/html/sarantel/sl1300/sl1300_soldering-manuallines_1198975001.webp)
Sarantel LTD
SL1300 Soldering Guidelines v2
Page 1
SL1300 Soldering Guidelines
Introduction
This document details the recommended soldering instructions for the SL1300
antenna to ensure that no mechanical stress is put on to the connection pins which can
cause damage to the antenna.
Recommended Equipment
Figure1: Either a Pace or Weller soldering station (as shown).
Figure 2: Soldering iron tip
Figure 3: Solder: Almit SR-37 Pb-Free
Use a fine tip on the
iron, we recommend
0.8-1.0mm 30deg tip