![background image](http://html1.mh-extra.com/html/megasat/traveller-man-3/traveller-man-3_user-manual_1765110026.webp)
1. Introduction
Antenna unit
The high-performance antenna, the elevation angle of 0-90°
and the auto-skew function enable the best possible reception
in the most important holiday destinations in Europe.
WARNING!
Never touch the antenna direc-
tly to the dish when lifting it out
of the box. Lift the antenna by
the base plate.
Control unit
The control unit is used for satellite selection and control. It is
connected between antenna and TV (receiver) and supplies the
antenna with power. After successful alignment the device can
be switched off.
Open the carton and remove the control unit, connection cables and packing
material. Lift the antenna straight up out of the box. Never turn the system
upside down!
1.3 System components
04
ENGLISH
Note:
The
Traveller-Man 3
has an additional connection for a second TV or receiver.
For the correct connection of the components, please refer to the connection
diagram in this operating manual.
Summary of Contents for Traveller-Man 3
