page 63 of 73
In the case of a power line problem, you will not be able to use the Continue feature. Instead it
will be possible to restart the cut from any particular location on the 3D model by selecting Tooling
- Start from a selected point CTRL + F2. All you have to do is select the correct output file and
move the tool as close as possible to the place you wish to start. the software will automatically find
the closest matching node and will continue from this location.
The tooling process is based on the parameters set in Configuration but some of them - such as
spindle rotation and cutting speed - care be adjusted any time during a cut by means of sliders in
Manual Control or with the wired remote control. (see
THE WIRED REMOTE CONTROL
).
Manual Control
Manual Control
The manual control window allows for a number of manual opperations, including the control of
the machin in each axis, as well as:
•
activating and deactivating spindle rotations –
always make sure the spindle cooling
system is on before you turn the spindle rotations on,
•
homing procedure,
•
setting the project's starting position,
•
moving in any axis by a given distance to to absolute co-ordinates
The control window shows the machine co-ordinates (in relation to its absolute home position)
as well as the project's co-ordinates (in relation to its starting location). Note the remote control
display only shows the project's co-ordinates.
www.megaplot.com
phone: +48 693 707 575
