page 37 of 73
–
use standard palette colors
–
DXF:
–
all elements should be on a single, zero layer
–
do not use BLOCKS, all elements should be drawn with polylines, curves,
etc.
–
each element needs to be colored (layer color is ignored)
Lining – cutting out the insides of shapes
Lining – cutting out the insides of shapes
In order to clear the inside of a closed shape, go to Functions \ Lining. You can modify the lining
operation by specifying the distance between the passes as well as the required angle.
Prior to performing the lining operation, it is important to select – as required – the
Cut the
negative
and
Skip the frame
parameters as they influence the lining operation (insides vs.
outsides). Select
Allow for tool diameter
if required.
The following examples show the lining operation alternatives, depending on the settings.
www.megaplot.com
phone: +48 693 707 575