manualshive.com logo in svg

Megaplot XMD Series, User Manual, Page: 19 / 73

Share
Download
Megaplot XMD Series User Manual Download Page 19

 page 19 of 73

MegaCut (2D) software 

MegaCut (2D) software 

The MegaCt (2D) software is suitable for precise tooling of any 2D shapes. It also supports 

multi-layer drawings for tooling at different depths. It allows for both through cuts as well as 
surface engraving. When cutting through a material, it is possible to use a spiral cut and a polishing 
operation. Thanks to a lining operation, it is possible to cut out the insides of a shape. The cutting 
tool diameter can be calculated in the tooling process and the tool can go on the inside of a shape, 
on the outside or along the center of the cutting line.

Thanks to Gcod support, MegaCut 2D allows for tooling in 3 axes as well.

The preparation of a drawing for MegaCut 2D is done in a graphics softare. MegaCut 2D accepts 

the following formats: PLT (CorelDraw), DXF (AutoCad) or NC (postprocesor – Gcod). Once a 
drawing is loaded in the MegaCut software it is possible to scale it to the required size. Thanks to 
the simulation feature, it is possible to preview on the PC screen the exact tooling sequence prior to 
starting the actual cut.

Machine start-up procedure

Machine start-up procedure

When turning on the machine, please always follow this sequence of steps:

•

turn the electronic controller on (turn the red main switch clockwise)

•

turn on the spindle cooling pump

•

turn on the PC

•

ensure  the   proper  controller-PC  connection  (controller   display should  read  

Ready,  USB 

connected

; if it says  

USB disconnected

  it means the PC failed to recognise the machine 

properly)

•

start MegaCut software

Possible problems in controller-PC communication are explained in the following section: 

Błąd:

Nie znaleziono źródła odwołania

.

Software settings

Software settings

Language version

At the moment, MegaCut 2D is available in the following languages: Polish, English, Italian and 
Slovakian. The application always attempts to start up in the same language version as your PC OS. 
If not available, it defaults to English.

Should you require MegaCut software in any other language, please do not hesitate to contact 

www.megaplot.com

 phone: +48 693 707 575  

[email protected]

Summary of Contents for XMD Series










































































Reviews:

No comments