page 29 of 73
5 times, each times increasing the drilling depth by 1 mm. The up
movements ensure proper material cleaning out of the drilled hole.
Ploter tab
Different settings for the measurement of the tool length (for details, go to:
Tool measurement
).
Tool measurement pad
Pad thickness –
set the thickness of the pad used to determine the tool length
Pad location –
set the location of the pad during the measurement procedure. Material depth
and pad thickness need to be set prior to the measurement procedure.
When measuring on the top of the material, the material thickness may
be set to 0.
Ploter IP –
hidden by default, as the ethernet module is an optional custom component. It
becomes visible only when the ethernet parameter is properly set
(details:
Network connection (ethernet)
).
Ploter IP (button)
-
sets the router's IP in the controller to the address shown on the left.
For this to work, the controller needs to be connected to the software
via USB.
Network connection (Ethernet)
-activates the ethernet connection
www.megaplot.com
phone: +48 693 707 575
