page 36 of 73
type of drawing.
Make sure to correct these values as needed before starting the cut.
PLT
the initial depths are based on the pen width multiplied by the depth multiplier from
Configuration. The pen width can be specified in the CorelDraw plt export window.
DXF
the initial depths are based on the milling depth setting from the CNC tab in
Configuration
When back in the main window, you can select any shape you wish and confirm the settings by
checking the milling depth as displayed on the bottom status bar.
Multi-layer drawings requirements:
www.megaplot.com
phone: +48 693 707 575
