page 24 of 73
Connect the nodes –
the software will automatically connect all overlapping nodes in order to
turn the lines into closed shapes
Delete overlapping shapes –
the software will delete all overlapping shapes in order to avoid
double-passes. For best performance, however, it is recommended you
avoid having overlapping lines so delete them prior to exporting your
shape to plt or dxf.
Set cutting direction –
the software will determine the cutting direction
Set cutting sequence
- the software will determine the cutting sequence
Project type
Single-layer –
all tooling will be done on the same depth
Multi-layer
- the tooling will be done on different depths/layers. Layers are indicated by
different colors and each layer/color has a corresponding tooling depth
For more details, please go to:
Multi-layer drawings
.
Depth multiplier –
this only applies to multi-layer drawings in the plt format. The depth of
each layer in automatically preset as the
pen width*depth multiplier.
Prior to starting a cut, please double check or adjust the cutting deoths
values for each layer. This parameter is ignored for all other types of
drawings.
Cross means point –
the machine will drill a hole at the intersection of two lines crossing at 90
degree angle. For more details, please see
Drilling
.
Cut the negative –
the negative of a shape will be cut. This parameter is closely related to two
www.megaplot.com
phone: +48 693 707 575
