![background image](http://html1.mh-extra.com/html/mega/88029807/88029807_installation-and-operating-instructions-manual_1764084013.webp)
13
(Diagram 6.25, Auto Recovery, error details OC1,
error time 1)
(Diagram 6.26, Auto Recovery count down,
5 seconds remaining)
(Diagram 6.27, Auto Start count down, 5 seconds remaining)
6.6
Error Menu display as diagram 6.28, error details will be displayed and all lights will be flashing.
Short press “Run” at the error menu, to auto recover the variable speed driver (keep the driver
Off).
Error Menu
(Diagram 6.8 Error, Error code OC1)
7 Routine Maintenance
The only routine maintenance needed is inspection/cleaning of trap basket. Debris or trash that
collects in basket, will choke off water flow through the pump. Follow instructions below to clean
trap:
1) Stop pump, close gate valve in suction and discharge, and release all pressure from system
before proceeding.
2) Unscrew trap lid (turn counterclockwise).
3) Remove strainer basket and clean. Be sure all holes in basket are clear, flush basket with water
and replace in trap with large opening at pipe connection port (between ribs provided). If
basket is replaced backwards cover will not fit on trap body.
4) Clean and inspect lid Ring; reinstall on trap cover.
5) Clean Ring groove on trap body and Replace lid. To help keep lid from sticking, tighten hand
tight only.
6) Prime pump (see priming instructions above)
8 Service & Repair Parts
Refer all service to your local agent or dealer as his knowledge of your equipment makes him the
vest qualified source of information. Order all repair parts through your dealer. Give the following
information when ordering repair parts:
1) Unit nameplate data or serial number on label.
2) Description of part.