ASP-I-MASPI-9 MedRx AVANT REMsp Installation Manual
Effective Date: 10-21-2016
8
Driver Installation
Use the supplied 6 inch or 6 foot USB Extension Cable with your REMsp
Your AVANT REMsp is powered by a USB cable connection to your computer.
1. We strongly recommend utilizing the supplied 6 inch or 6 foot USB extension cable with your
REMsp. Plug the USB extension cable into your computer as shown above.
2.
Wait for the system to copy and install default drivers. During this process, you will see the following
message. “New Hardware has been found”.
3.
When this screen appears or a
message in the bottom right corner
appears “New Hardware is ready to
use”, click
Close.
4.
On the Avant REM Main screen, click
Advanced Options.
