ASP-I-MASPI-9 MedRx AVANT REMsp Installation Manual
Effective Date: 10-21-2016
15
Symbols that may be used:
or SN
Read the instruction
manuals for safe usage
of the device.
(operating instructions)
Indicates that the device
serial number will follow
Type B applied part.
(Type B equipment)
Manufacturer (MedRx)
Authorized Representative
in Europe
Non-ionizing electromagnetic
radiation
Special Disposal Required
Humidity
Limitation
Caution, General warning
sign
Temperature limitation
Read the instruction
manuals for safe usage
of the device
(operating instructions)
Class II equipment
Start (of action)
Stop (of action)
Percentile Setup
Calibration
Loudspeaker (Speaker)
Headphones
Microphone
Recording
Recommended Procedures for Cleaning and Disinfection
1. Probe Tubes are single use components, and should not be re-used by another patient.
2. It is recommended that 70% Isopropyl Alcohol should be applied to a soft clean cloth or tissue, not
directly on the component to be cleaned. The cloth should never be wet, just damp. A mild soapy
water solution is an alternative cleaning liquid.
3. To ensure that cross contamination does not occur, use clean cloth or sealed Alcohol swabs for
each device to be cleaned.
4. Wipe the surfaces of the probe microphone, black ear loop and headphone pads with the 70%
Isopropyl Alcohol. Clean other transducers in the same way.
Do not let 70% Isopropyl Alcohol or
water enter the microphone sound inlet.
5. The probe microphone cords and white device housing may also be wiped with 70% Isopropyl
Alcohol. The speaker controls, headphone ear pads, head band and other components may be
cleaned in a similar way.
6. Let all components that have been cleaned, thoroughly dry before use.
7. Cleaning of the computer should be performed using the methods suggested in the computer’s
manual.
