WIRELESS DISPLAY cannot be
established.
• Check that all necessary settings have been made. Read the section
“Wireless Display” on page 28.
The remote control is not
working.
• Check whether the batteries in the remote control are functional and
have been inserted the right way round.
• Ensure the sensor fi eld is not exposed to strong light.
• Turn the device off and on again using the power switch on the bottom
of the device.
Menu cannot be opened.
• Check whether CEC is enabled. In this case, the menu cannot be
opened. This is not a defect. In some cases, the menu of the device
connected via
HDMI1
9
opens. This is dependent on the source
device and must be supported accordingly. You will fi nd more
information on page 44.
• Change the input source.
Filter function of the
channel list does not work
permanently.
• To set a "permanent" fi lter, you need to call up the channel list with the
OK
22
button and then the expanded channel list with the
green
button
28
.
• Call up the expanded channel list via
MENU > CHANNEL LIST
and
then use the
FILTER
function.
If, however, you call up the channel list during operation
via the
OK
button and then use the
FILTER
option, this
option acts more like a search function. This means that
the complete channel list is displayed the next time you
press the
OK
button after closing the channel list. The
previously fi ltered results are not retained.
HDR content from a player
connected via HDMI is not
played in HDR.
• In
the
SETTINGS > SOURCES
menu, set the HDMI input being used to
ENHANCED
(see p. 41).
57
Troubleshooting
