Installation menu
Installation
Automatic channel scan
Manual channel scan
Network channel scan
Analogue fine tune
Installation Settings
Signal Information
First time installation
Menu Item
Setting
AUTOMATIC
CHANNEL SCAN
The automatic channel search function helps you to search for and save new
channels on your TV.
A number of search options are available.
Once you have selected the search option, press
OK
22
. Confi rm the query with
YES
and press
OK
to start the channel search.
Press
MENU
19
to cancel the search prematurely. In this case, any found channels
will not be saved.
MANUAL
CHANNEL SCAN
This function is used for the direct entry of channels.
NETWORK CHANNEL
SCAN
Selection between digital cable or DVB-T channel groups. This searches for related
channels of the currently selected station. The information sent in this respect
depends on the selected channel and leads to different results.
The existing channel list is replaced when the network search
is started.
ANALOGUE
FINE TUNE
Here you can fi ne-tune analogue channels.
INSTALLATION
SETTINGS
Here you can make additional installation settings.
STANDBY
SEARCH
If this function is set to
ON
, the TV will search for available
channels while it is in standby mode. When the device fi nds new
or not yet available channels, a menu will be displayed that you
can use to accept or reject the changes.
SIGNAL
INFORMATION
Displays further data about the received signal.
FIRST TIME
INSTALLATION
This function corresponds to the initial installation steps that occur after switching on
for the fi rst time.
Carrying out the fi rst-time installation again will reset all
settings back to factory defaults, including the PIN.
45
Via the OSD menu