Menu Item
Settings
TIMERS
You can use the
SLEEP
TIMER
to programme
the device to switch
off automatically. You
can set the time in
30-minute increments
(maximum 2 hours).
The sleep timer
countdown begins
immediately after
the setting has been
made. Select
OFF
to deactivate the
function.
Add Timer
10:55 Tue 20/02/2018
Network Type
Timer Type
Channel
Record Type
Date
Start
End
Duration
Repeat
Change/Delete
Playback
arte HD
Save
Navigate
Discard
Exit
Change Value
MENU
BACK
OK
All
Record
14 - arte HD
Time
20/02/2018
11:00
12:00
60 min
Once
Allowed
Use parental settings
NETWORK TYPE
Setting the reception type (DVB-T, DVB-C or analogue).
TIMER TYPE
TIMER
or
RECORD
.
If a timer has been programmed via the EPG, the corresponding
programme will be displayed in the
TIMER
menu. The timer then
switches to the relevant programme. However, it is not possible to
output the signal. The displayed timer can now be selected and
deleted using the
red button
28
. Press the
green button
28
if you
want to edit the timer. The
EDIT SELECTED TIMER
menu will then open.
The timer function can be used to switch over to another channel at a
particular time (with the device switched on).
If you select the
RECORD
setting, a hard drive or a USB stick must be
connected via the USB connection. The relevant programme will then
be recorded to the hard drive or USB stick.
If the USB stick is not working correctly and an
error message is displayed (e.g. not enough space
available, although the stick is empty), it can also
be formatted by the smart TV under the menu
option
MEDIA BROWSER > SETTINGS > RECORDING
SETTIINGS > FORMAT DISK
(media browser).
CHANNEL
Select the channel.
RECORD TYPE
This is preset and cannot be changed.
40
Via the OSD menu