278
15.6.2. Searching for software updates
Select
CHECK NOW
to start searching for software updates.
15.7. Starting the set-up wizard
Select
SETUP WIZARD
to start the set-up wizard as described in the section on
using the device for the first time.
15.8. Viewing software information
The software version and radio identification number of the device are shown un-
der
INFO
.
15.9. Data protection
Select
PRIVACY POLICY
to view the data protection information as shown in the
section on setting up the device for the first time.
15.10. Confi guring the display lighting
You can configure the display lighting under
BACKLIGHT
:
–
Dim the display in standby mode after a pre-determined time
–
Display brightness
Setting the dim time in standby mode
Select
SWITCH-OFF
and press
OK
to confirm.
Select
ON
,
10
,
20
,
30
,
45
,
60
,
90
,
120
or
180
seconds and press
OK
to confirm.
Display brightness during operation
Select
OPERATION
and press
OK
to confirm. Set your preferred brightness
HIGH
,
MEDIUM
,
LOW
and press
OK
to confirm.
Display brightness in standby mode
Select
STANDBY
and press
OK
to confirm. Set your preferred brightness
HIGH
,
MEDIUM
,
LOW
or
OFF
and press
OK
to confirm.
